Как лучше повесить шторы на всю стену или только на окно?
Очень часто клиенты обращаются ко мне с вопросом, как оформить окно, когда большие простенки. Большими будем считать от 80 см. Лучше оформить окно отступив 30-50 см? Или всю стену?
Примерно 80% клиентов просят сделать во всю стену. Зачем? Я не понимаю зачем драпировать стены. Это не красиво. Хуже только, задрапированные стены тюлем. Как на фото ниже.
Стол в гробу, по другому не скажешь.
Честно скажу, что мне, как дизайнеру, или швее, которая будет шить ваш заказ, выгоднее второй вариант. Скорее всего, по этой причине, дизайнеры и внушили клиентам, что это красиво. То же самое можно сказать и про большое количество ткани на окне.
Сравните это помещение и желто-зеленый гробик. Видите разницу? Теперь представьте, как будет выглядеть комната с кирпичными стенами, если все завешать шторами.
Иногда заказчик просит чтоб трубы, батареи были спрятаны за тканью . Когда у вас ремонт на стадии отделки, то вся инженерная коммуникация бросается в глаза. Но когда, вы повесите шторы, картины, расставите мебель, то они уйдут на десятый план.
БИТАЯ ИЛИ НЕТ?! ПРОВЕРЯЕМ ПРАВИЛЬНО!
Лет 15 назад у меня была клиентка, которая задрапировала стену с окном и две стены органзой. Это было некрасиво и нелепо. А клиентке нравилось.
ИсточникКак покрасить шторы своими руками: нет ничего проще
Чувствуете, что в доме нужны какие-то перемены, но не значительные? Присмотритесь к идее покраски штор своими руками. Это значительно экономит средства, поскольку покупка новых штор почти наверняка обойдётся семейному бюджету в кругленькую сумму. Напротив, покрасить шторы своими руками — это не только бюджетная, но ещё и очень увлекательная, и творческая работа! Вы можете выбрать абсолютно любой цвет и стать настоящим художником.
Итак, для работы вам понадобятся следующие материалы:
- хлопковая ткань (шторы, тюль, скатерть или любая другая ткань для покраски);
- краска для ткани;
- соль;
- резиновые перчатки.
Первым этапом является предварительная стирка. Краска отлично закрепляется только на хорошо отстиранной ткани. Следом выберите место, в котором будете красить штору. Поскольку это довольно объёмная ткань, придётся остановиться либо на большом тазу, либо, если его нет под рукой, подойдёт ванна или даже барабан стиральной машинки.
Заполните выбранную ёмкость горячей водой. Налейте ровно столько воды, сколько нужно, чтобы покрыть штору. Добавьте соль и краску, как указано в инструкции на упаковке. Не забудьте надеть резиновые перчатки перед работой!
КАК ОПРЕДЕЛИТЬ КРАШЕНУЮ МАШИНУ своими силами ? Без толщиномера
Поместите ткань в полученный раствор и оставьте на 30 минут (или до достижения желаемого цвета). Конечно, лучше и равномернее всего окрашиваются светлые ткани.
Выньте ткань и поместите её в холодную воду, тщательно промойте, пока вода не станет бесцветной. Следом вам нужно только постирать штору в стиральной машинке на деликатной стирке.
ИсточникHow to Dye Curtains
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 10 people, some anonymous, worked to edit and improve it over time.
This article has been viewed 207,709 times.
Dyeing curtains can seem like an intimidating project, but if you’re up for a challenge, the results can be very satisfying. The trickiest part is choosing the right color dye and figuring out how much to use. After that, the rest of the process is rather straightforward.
- Note that some dyes may or may not be capable of coloring different types of materials, but most of them have the same abilities and limitations. Nonetheless, you should check the label of the dye you plan to use to verify that it can handle your fabric type.
- Most dyes will color cotton, linen, wool, silk, and ramie. Certain synthetic fibers, like rayon and nylon, are usually dyeable, as well.
- Most dyes will not color fabrics primarily composed of polyester, acrylic, acetate, fiberglass, spandex, or metallic fibers. Bleached fabrics, waterproof fabrics, stain resistant fabrics, and «dry clean only» fabrics are usually off limits, as well.
- You should use laundry detergent, but do not use fabric softeners.
- This pre-washing step helps remove any finishes or grime that could otherwise interfere with the way the fabric absorbs dye. As a result, pre-washed curtains will absorb dye more evenly and more accurately.
- The curtains do not need to be completely dry, but you should not allow them to remain soaked, either, since the moisture in the curtains can turn cold and negatively affect the way the dye interacts with the material later on.
- Do a little research before buying your dye. Read reviews for each color under consideration and look at pictures. Figuring out the exact right choice can be difficult, but you can minimize the risk of choosing an unsatisfactory color by taking the time to check into each option.
- Use dye remover instead of bleach since bleach can make it difficult for fabrics to absorb dye.
- A dark fabric cannot be dyed a lighter color. You might be able to dye a colored fabric if your dye is a darker hue, but the results will be a blend of the dye and the color already on your curtains. Since the results can be unpredictable, completely removing the original color is a safer approach. [1] X Research source
- To use color remover:
- Fill your washing machine with hot water and add three to four packets of dye remover as the tub fills.
- Place your still-wet, pre-washed curtains in the washer once the agitation cycle begins. Allow them to soak in the washer for 10 to 30 minutes, or until the color washes out.
- Drain the washer.
- Rewash the curtains with detergent. Use a full wash and rinse cycle.
- Clean the washer with hot water and detergent before using it again to wash out all traces of the color remover.
- Weigh your curtains on a scale to determine how heavy they are. The easiest way to do this is to weight yourself, then weight yourself while holding the curtains. Subtract the difference to figure out the weight of the curtains.
- As a general rule, you will need one box of powder dye or 1/2 cup (125 ml) liquid dye for every 1 lb (450 g) of weight. You can use less dye if you want a lighter shade. For a darker color, double this amount.
- Glass and stainless steel will not be stained by the dye, but most plastics will become stained.
- If you are worried about staining the tub, consider lining it with plastic sheets before filling it with water.
- This works best if you are using a single tub. If you need to split the process up between two tubs, though, make sure that the amount of water and the amount of dye you add to each tub is exactly equal.
- Alternatively, you could use your washing machine to dye the curtains. To do so, begin by filling the washing machine basin with the hottest water possible. The rest of the process will essentially follow the same steps.
- Usually, you will need to prepare a bottle of liquid dye by vigorously shaking it for a minute or so.
- To prepare powder dye, fully dissolve one packet in 2 cups (500 ml) of very hot water.
Mix in the dye. Dump your prepared dye into the filled basin or filled washing machine (whichever you decided to use). Use a paint stick or board to stir the dye in until you are certain that it has fully spread throughout the water.
- Hot water helps activate the dye. Your results will be as pure and even as possible if both the dye bath and the curtains are hot when you transfer the material to the dye.
- Do not stir or agitate the curtains during this time. If you are using a washing machine, do not start any sort of washing cycle yet.
- Salt and vinegar help intensify the dye color. Use salt with cotton, linen, ramie, and rayon. Use vinegar with silk, wool, and nylon.
- Liquid detergent allows the dye to move more freely throughout the water and into the fabric fibers.
- This amount of time is standard if you want to produce the intended shade; however, you can leave the curtains in for a shorter or longer time if you want a lighter or darker shade, respectively.
- Check the curtains periodically until you achieve the shade you want. Note, though, that the final shade will usually be a bit lighter than it appears when wet.
- Agitate the curtains continuously. If you are machine dyeing the curtains, set the machine on an agitate cycle and continue agitating the fabric the entire time. If you are dyeing the curtains in a tub, stir the fabric every few minutes using a large painting stick or board. [2] X Research source
- If you can set the soil level of your washing machine, set it to «heavy soil.»
- Do not drain the dye bath if you dyed the curtains in your washing machine. Simply run the machine using the water already inside.
- The first wash cycle should have washed away most of the excess dye. This second cycle should help set the dye.
- Make sure that the water runs clear by the end of your cycle. When the water runs clear, the dye is set and should no longer bleed off the material.
- Alternatively, you can hang dry the curtains on a clothesline. They should air dry completely after a day or two, as long as the day is dry and the sun is bright.
- Consider putting a little bleach in the washing machine for this step, as well.
Possibly. Follow the steps below on removing the previous color from the curtains first. If you try to dye the curtains red without removing the blue dye, it will not turn out the way you want.
Wear rubber gloves throughout the process to prevent your hands from getting stained by the dye. Consider wearing “junky” clothes that you don’t mind staining, or wear a full body apron/smock over your clothing before you handle the dye.
You Might Also Like
- ↑http://www.yellowbrickhome.com/2011/03/29/how-not-to-dye-curtains/
- ↑http://shiftctrlart.com/BlogPost/uj3a
About This Article
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 10 people, some anonymous, worked to edit and improve it over time. This article has been viewed 207,709 times.
Dying your curtains is a great way to change a room’s décor without spending much money. All you’ll need is a dye of your choice, a bath tub, and salt or white vinegar. If your curtains are dark colored, you’ll also need to wash them in the machine with a dye remover before they can be recolored. Keep in mind that curtains made primarily of synthetic fabrics, like polyester, acrylic, and spandex can’t be dyed at home. However, curtains made of natural fabrics, rayon, or nylon will be fine. You’ll want to soak your curtains in a bath tub filled with hot water and dye for a couple of hours. After the first 5 minutes, add 1 cup of salt or white vinegar to help boost the dye.
After they’ve soaked, wash the curtains on a warm cycle to get rid of the excess dye. For more tips, including how to clean your washing machine after dying your curtains, read on!
Источник